![]() "If you ever had to think twice about lighting up a joint for fear of someone smelling it. If you were ever forced to blow the smoke out a window and pray you don't reek of weed. If you ever had to sneak around and couldn't enjoy a good buzz..." Easy THC Extraction © 1995 Axis Innovations This article will describe, in detail, a technique of extracting the essential oils from hemp. The final product will be a dark, oily liquid that contains 70+% pure THC. The following steps require nothing more than simple, easy to find materials and a little time. Advantages of THC oil:
Materials you'll need for extraction:
Step 1 You'll need to chop up your weed and pick apart the buds until it looks like grass clippings. Remove any seeds, they have their own oils which we don't want. Dump the powdered pot into the mason jar and pour in just enough grain alcohol so the weed particles float freely in the mixture. Place the lid securely on the jar and shake a few times. Let this mixture sit for a few hours, shaking it every once in a while. The alcohol should have turned a dark green color and when shaken should form colorful, oily bubbles on top. Place the sturdy cloth over the metal container and press the cloth down to form a funnel. Carefully pour the contents of the mason jar onto the cloth which is in the metal cup. Make sure to get most of the weed particles out of the jar. Gather up the edges of the cloth and squeeze the remaining liquid out of the lump of weed into the metal cup.
Step 2 Be sure to use an electric stove in this step! (If you don't have one, read Step 2a) Take the metal cup containing the green liquid over to the stove. Turn one of the electric eyes on LOW setting and place the metal cup on that burner. I highly suggest using the fan over the stove to remove the alcohol vapors during this entire step. Watch the liquid closely. It should only boil slightly, never raise the burner temperature above MEDIUM LOW. We need the liquid to cook down until it's slightly thick. This may take some time but be patient. Once the liquid starts to thicken and turn darker, remove it from the heat. Never let it get too thick or it'll be too difficult to work with. If you do accidentally make it too thick, just add a small quantity of the grain alcohol to the metal cup and swirl it around till it's thinner. Let it cool down to room temperature inside the metal cup. It should be runny enough to be poured into the eye-dropper bottle easily. You now have your final product: THC oil. It's necessary to have some grain alcohol left in the resulting liquid so it's easy to work with. This will not affect the potency of the oil.
Step 2a This part is for the people with gas stoves. Do not use a gas stove to cook down alcohol! The vapors will explode! You'll have to have patience to complete this step. To get a final product just put the metal container in a place where it won't be disturbed. The alcohol will have to evaporate on its own. If at all possible keep it in a slightly warm area with decent ventilation. It may take days. Once it's evaporated test to see if it's too thick. If it is, pour a small amount of grain alcohol in the metal cup and mix. Pour the liquid into your eye-dropper bottle.
Smoking Instructions (NOTE: When smoking this oil in any form, do not let it come into direct contact with a flame. That destroys much of the THC and defeats the purpose of this whole project.) You have the oil in the eye-dropper bottle and you're ready to smoke some? Clean up your mess first. You don't want to have to explain why a rag of wet marijuana is lying on the kitchen table do you? Wash out the jar, the metal cup, and throw away the cloth. Throw away the weed too, it's useless. Use a water/alcohol mixture to wash out the jar and cup.
Materials you'll need for smoking:
Once you've smoked what's in the spoon, put a few more drops in and repeat as many times as you want. On occasion I've smoked so much at one time that all I could do was lay on the floor with a stupid look on my face. Also, I've noticed I get a bad case of "cotton mouth," it's normal. If you're a smoker, you can put a few drops into a cigarette, let it dry, and feel free to catch a buzz without the smell.
Have fun and be safe! This page has been accessed 119192 times since June, 2001 Drugs Position Statement Drugs Message Board |